Featured Products

 


Blow Off Box

  • Capture the residual coolant from freshly machined parts
  • Connects directly to the new mist collector intake plenum
  • Eliminates airborne coolant
  • Captures coolant mist directly from the CNC machine enclosure and the operator's air gun

 


 

MistBuster 500 Media

 

Principles of Operation:

Polluted air is drawn through the first stage of mechanical mist impingers, designed to remove the larger mist droplets and particles. The remaining sub-micron particles are removed in the second stage consisting of a 95% polypropylene pleated media filter.

STANDARD FEATURES:

  • Control circuitry included
  • Motor starter is not required
  • Infinitely variable motor speed controller
  • 10 foot cord with molded plug
  • 3 year parts warranty

 

 


 

MistBuster 2000

 Principles of Operation:

Polluted air is drawn through the first stage of mechanical mist impingers, designed to remove the larger mist droplets and particles. The remaining sub-micron mist droplets and particles are removed in the second stage of two side by side electrostatic precipitators (ESP). In this stage the contaminants are subjected to an intense electrical charge through ionization and then collected by the collector plates, working similar to magnets by attracting the charged particles. A third stage and optional fourth stage of ESP’s collect any mist particles that may not have been captured by the first two stages of filtration.

STANDARD FEATURES
  • Control circuitry included.
  • Motor starter is not required
  • Infinitely variable motor speed controller
  • Patented selector switch for synthetic and water-based coolants or oil coolants
  • Two power supplies for added reliability
  • 10 foot cord with molded plug
  • 3 year parts warranty

 

 

 


 

MistBuster 500 - Mist & Smoke Eliminator

The MistBuster 500 mist collector captures and removes mist and smoke from metalworking machines in the machine tool industry. Our patented technology ensures high efficiency with no disposable filters in a compact machine mounted package, easy to install. Variety of mounting options allow for maximum versatility.

-Abbreviated Specifications-
For the MISTBUSTER 500 Mist Collector

Air Flow: 50-500 cfm @ 0.6" wg top discharge
Efficiency: Up to 99.8% (per ASHRAE 52.2)
Dimensions: 25" L x 13.5" W x 18.375" H, 71 lbs.
Filtration: 1st: 4" think aluminum mist impingers
2nd: ESP Cell - Minimum voltage gradient
is 20,000 volts per inch
3rd: 1" thick aluminum mesh



MistBuster Infinity

MistBuster Infinity is the latest addition to the MistBuster line of filtration systems from Air- Filtration Systems, LLC. The patented MistBuster Infinity is designed to capture mist and smoke from metalworking applications the machining industry. A proprietary long life filter with 288 sq. ft. media offers extensive time between filter replacements. A variety of mounting options allow for maximum versatility. Variable speed control allows for precise control over airflow and efficiency.

-Abbreviated Specifications-
For the MISTBUSTER ® Infinity Mist Eliminator

Air Flow: Infinitely adjustable from 50-1000 cfm top discharge
Efficiency: Minimum 95% DoP on 0.3 micron particles
Dimensions: 27" L x 26.25" W x 31.64" H, 185 lbs.
Filtration: Four inches of aluminum mist impingers then
Long Life 95% DoP filter with 288 sq. ft. of media

Power Input: 115 Vac, 60 Hz, 9.5 amps
230 Vac, 60 Hz, 4.75 amps 



Sump Saver

SFI is proud to announce the introduction of a new idea in coolant filtration. The Sump-Saver is an economical unit that employs roll media paper and the efficient vacuum filtration principle. The Sump-Saver is a portable unit that was designed for machining facilities with multiple coolant sumps. A Sump-Saver can be cleaning the fluid at one machine one shift, and moved to another the next. By rotating the unit through a plant, coolant life can be extended in several machines. 

 



 

XJ-2 Air Pressure Control & HEPA Filtration System

The XJ-2 HEPA filtration system is anaffordable,portable ,compact & quiet system that assists you in complying with CDC guidelines for converting ordinary patient care rooms into negative-pressure TB isolation rooms. Suitable for hospitals,extended care facilities,retirement settings & institutional use. The XJ-2 is also used in Commercial/Industrial Cleanrooms of all levels to provide HEPA cleanliness and in creating required inroom positive pressure rating.



 

XF Series TFP Mist Collection Systems

The TFP-Eliminator product line incorporates a patented collection process called Turbulent Flow Precipitation (TFP). The TFP can be configured to collect mist from a wide variety of industrial processes such as parts washing, machining, milling, boring, grinding, etc. There are no practical limitations as far as temperature or corrosive atmospheres are concerned. To find out more about this exciting new TFP technology please call or write us at Air-Filtration Systems. You can also visit the web site at www.tfp-eliminator.com and run the slide show!



 

US36 Ultrasonic Cleaning System

The US36 is designed for the most difficult and demanding applications. The US36 has a special designed "SWEEP FREQUENCY GENERATOR" that increases the effectiveness of ultrasonic agitation and enhances the cleaning quality/results. The US36 is equipped with an automatic oil skimmer and cartridge filter that will significantly extend the cleaning fluid life.